# Unable to precompile any packages

**URL:** <https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311>\
**Category:** General Usage\
**Tags:** question\
**Created:** [May 15, 2024, 5:10pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311 "2024-05-15T17:10:07Z")\
**Posts on this page:** 19\
**Page:** 1

<div class="post-metadata">

**Author:** ![gplayer](https://avatars.discourse-cdn.com/v4/letter/g/a587f6/32.png) [@gplayer](https://discourse.julialang.org/u/gplayer)\
**Post date:** [May 15, 2024, 5:10pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/1 "2024-05-15T17:10:07Z")

</div>

I’ve run into the following error which I’ve been unable to fix. Whenever I try to run “using \*” for any packages (I’ve tried Plots, CSV, JSON, QuadGK, and a few others), it fails to precompile.  
The top line of the error is below, following “using Plots”. I’ve tried a completely fresh re-install of Julia. It’s worth noting this problem started spontaneously - my Julia install was working fine one day, the next day this error popped up when I tried to run one of my scripts. Thanks for any help!

 ![error_1](https://global.discourse-cdn.com/julialang/original/3X/3/2/32f93e922b4aad3c3066d0ba5786df4ad5fb0835.png)

---

<div class="post-metadata">

**Author:** ![gplayer](https://avatars.discourse-cdn.com/v4/letter/g/a587f6/32.png) [@gplayer](https://discourse.julialang.org/u/gplayer)\
**Post date:** [May 15, 2024, 5:10pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/2 "2024-05-15T17:10:43Z")

</div>

The stack trace (I’m not allowed to embed two images):

 ![error_2](https://global.discourse-cdn.com/julialang/original/3X/b/1/b11e7c6b2d01d3108075b222e60b1d3a41972725.png)

---

<div class="post-metadata">

**Author:** ![Palli](https://sea2.discourse-cdn.com/julialang/user_avatar/discourse.julialang.org/palli/32/3380_2.png) [@Palli](https://discourse.julialang.org/u/Palli)\
**Post date:** [May 15, 2024, 5:36pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/3 "2024-05-15T17:36:00Z")

</div>

Welcome,

Which version of Windows do you use, maybe 8 (note it’s not supported, and may be implicated):

> <https://github.com/cypress-io/cypress/issues/28598#issuecomment-1873202697>
>
> Hello,
> 
> I'm encountering an issue when trying to start Cypress with the follow…ing error message:
> 
> !\[cypressErr\](https://github.com/cypress-io/cypress/assets/76797190/2845b9db-e953-4fe4-9d09-ee22eade2aff)
> 
> 
> 
> I'm working on Windows, and my Node version is v20.10.0. I also noticed a similar issue referenced in #2657, but I don't understand how the user resolved the problem, 
> where the user mentioned setting NODE\_OPTIONS=. Could you provide additional details on where exactly this should be set in the environment? I don't clearly understand how to resolve this issue.
> Thank you very much for your assistance!
> 
> 
> 
> \### Debug logs
> 
> \`\`\`Text
> Cypress failed to start.
> 
> This may be due to a missing library or dependency. https://on.cypress.io/required-dependencies
> 
> Please refer to the error below for more details.
> 
> \----------
> 
> Command failed with exit code 3221225785: C:\\Users\\sadek\\AppData\\Local\\Cypress\\Cache\\13.6.2\\Cypress\\Cypress.exe --smoke-test --ping=782
> 
> \----------
> 
> Platform: win32-x64 (6.3.9600)
> Cypress Version: 13.6.2
> \`\`\`
> 
> 
> \### Cypress Version
> 
> 13.6.2
> 
> \### Node version
> v20.10.0
> \### Package Manager
> npm 9.2.0
> 
> \### Operating system
> Windows
> 
> 
>  
> I resolved the issue on my end by changing the Cypress version: npm install --save-dev cypress@10.8.0, and then launching it with the command npx cypress open. But I can't yet use the latest version of Cypress!

Do you use VS Code? I googled your error code…

It shouldn’t be your first guess but after googling the error code, maybe it’s related to a hardware fault (or does it actually mean just similar to segfault?):

> <https://github.com/formulahendry/vscode-code-runner/issues/820#issuecomment-995179465>
>
> Issue Type: \<b\>Bug\</b\>
> 
> my code runner is not showing the expected output for …some of the programs of c++ in the output file. rather it is showing "exited with code=3221225785". I don't understand. the same code is running in my friend's laptops' VSCode and is running in the custom invocation of code forces.
> This is not the first time it had happened.  
> This is not the sole issue. one day it was showing a bit different output than expected. It was showing right output in my friend's laptop. these are the two issues that i think i am currently facing right now.
> 
> Extension version: 0.11.4
> VS Code version: Code 1.57.1 (507ce72a4466fbb27b715c3722558bb15afa9f48, 2021-06-17T13:28:07.755Z)
> OS version: Windows\_NT x64 10.0.19043
> Restricted Mode: No
> 
> \<details\>
> \<summary\>System Info\</summary\>
> 
> |Item|Value|
> |---|---|
> |CPUs|Intel(R) Core(TM) i5-9300H CPU @ 2.40GHz (8 x 2400)|
> |GPU Status|2d\_canvas: enabled\<br\>gpu\_compositing: enabled\<br\>multiple\_raster\_threads: enabled\_on\<br\>oop\_rasterization: enabled\<br\>opengl: enabled\_on\<br\>rasterization: enabled\<br\>skia\_renderer: enabled\_on\<br\>video\_decode: enabled\<br\>vulkan: disabled\_off\<br\>webgl: enabled\<br\>webgl2: enabled|
> |Load (avg)|undefined|
> |Memory (System)|7.86GB (2.74GB free)|
> |Process Argv|--crash-reporter-id b055e1f6-4e24-4664-be3a-c16faaded665|
> |Screen Reader|no|
> |VM|0%|
> \</details\>\<details\>
> \<summary\>A/B Experiments\</summary\>
> 
> \`\`\`
> vsliv368cf:30146710
> vsreu685:30147344
> python383:30185418
> pythonvspyt700cf:30270857
> pythonvspyt602:30300191
> vspor879:30202332
> vspor708:30202333
> vspor363:30204092
> vswsl492cf:30256860
> vstes627:30244334
> pythonvspyt639:30300192
> pythontb:30283811
> pythonvspyt551:30311712
> vspre833:30321513
> pythonptprofiler:30281270
> vsdfh931:30280409
> vshan820:30294714
> pythondataviewer:30285071
> vscus158:30321503
> pythonvsuse255cf:30323309
> vscorehov:30309549
> vscod805cf:30301675
> binariesv615cf:30323120
> 
> \`\`\`
> 
> \</details\>

Or maybe ENV var related:

> <https://stackoverflow.com/questions/53808442/vs-code-c-exited-with-code-3221225785/71688243#71688243>

---

<div class="post-metadata">

**Author:** ![gplayer](https://avatars.discourse-cdn.com/v4/letter/g/a587f6/32.png) [@gplayer](https://discourse.julialang.org/u/gplayer)\
**Post date:** [May 15, 2024, 5:52pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/4 "2024-05-15T17:52:19Z")

</div>

Hi, thanks for the swift response! I’m using Windows 10 Pro. I was using VScode, which is when I first ran into the problem, but I uninstalled it a while ago while searching for a solution to my problem. I’ve played around a lot with environment variables, nothing I’ve done (setting various JULIA\_\* variables, removing others, changing the order) has seemed to have any effect.

---

<div class="post-metadata">

**Author:** ![Palli](https://sea2.discourse-cdn.com/julialang/user_avatar/discourse.julialang.org/palli/32/3380_2.png) [@Palli](https://discourse.julialang.org/u/Palli)\
**Post date:** [May 15, 2024, 6:15pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/5 "2024-05-15T18:15:29Z")

</div>

My first guess was, since Windows, some enterprise restrictions (or virus checker).

I believe I’ve decoded the error message to (for that field):

> ~~FACILITY\_SECURITY 9  
> The source of the error code is the Security API layer.~~

> **[\[MS-ERREF\]: HRESULT](https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-erref/0642cb2f-2075-4469-918c-4441e69c548a?redirectedfrom=MSDN)**
>
> The HRESULT numbering space is vendor-extensible. Vendors can supply their own values for this field, as long as the C bit (0x20000000) is set,

> **[System Error Codes (0-499) (WinError.h) - Win32 apps](https://learn.microsoft.com/en-us/windows/win32/debug/system-error-codes--0-499-)**
>
> Describes error codes 0-499 defined in the WinError.h header file and is intended for developers.

You can look up error messages with a tool, if I recall err.exe in Windows. Maybe you need it’s hex value C0000139

What I also found (but ~~I think mis-decoded, since least significant is to the left…~~ ):

ERROR\_NOT\_ALLOWED\_ON\_SYSTEM\_FILE313 (0x139)

> **[How to decode Windows errors?](https://borncity.com/win/2016/07/05/how-to-decode-windows-errors/)**
>
> \[German\]In case of error Windows reports a cryptic error code instead of a detailed error description. Within this blog post I will try to give a few hints to decode this Windows error codes. If Windows reports an error (like code 1605) it’s not...

---

<div class="post-metadata">

**Author:** ![Palli](https://sea2.discourse-cdn.com/julialang/user_avatar/discourse.julialang.org/palli/32/3380_2.png) [@Palli](https://discourse.julialang.org/u/Palli)\
**Post date:** [May 15, 2024, 6:35pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/6 "2024-05-15T18:35:25Z")

</div>

I think actually I found the right error code here (there are many types… I think I’m now looking up the correct type):

> {Entry Point Not Found} The procedure entry point %hs could not be located in the dynamic link library %hs.

I though don’t know the exact cause for that…

> **[\[MS-ERREF\]: NTSTATUS Values](https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-erref/596a1078-e883-4972-9bbc-49e60bebca55)**
>
> By combining the NTSTATUS into a single 32-bit numbering space, the following NTSTATUS values are defined. Most values also have a defined

I suggest Julia changes to reporting Windows exit codes in hexadecimal, in case more easily googlable that way (but only on Windows, Linux reports in decimal? And has no complex decoding?). And maybe Julia should decode, at least some of the code, like that one, in case helping, and fill in for “%h” the error message. I suppose a try clause is needed…

Likely decode for sub-code:

> ERROR\_NOT\_ALLOWED\_ON\_SYSTEM\_FILE  
> 313 (0x139)
> 
> Operation is not allowed on a file system internal file.

You can do (to confirm, or deny):

```julia
Err_6.4.5.exe <error code>

```

i.e. needs to use the hex code, here C0000139, similar to:

```julia
C:\Tools>Err_6.4.5.exe c000021a
# for hex 0xc000021a / decimal -1073741286
 STATUS_SYSTEM_PROCESS_TERMINATED ntstatus.h​
# {Fatal System Error}​
# The %hs system process terminated unexpectedly with a​
# status of 0x%08x (0x%08x 0x%08x).​
# The system has been shut down.​
# as an HRESULT: Severity: FAILURE (1), FACILITY_NULL (0x0), Code 0x21a​
# for hex 0x21a / decimal 538​
 ERROR_ABIOS_ERROR winerror.h​
# An error occurred in the ABIOS subsystem.​
# 2 matches found for "c000021a"

```

---

<div class="post-metadata">

**Author:** ![gplayer](https://avatars.discourse-cdn.com/v4/letter/g/a587f6/32.png) [@gplayer](https://discourse.julialang.org/u/gplayer)\
**Post date:** [May 15, 2024, 6:57pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/7 "2024-05-15T18:57:53Z")

</div>

I’ll admit to not being the most savvy windows user in the world. If I’m understanding all this, it seems like the system either (a) can’t find the DLLs it needs or (b) is loading conflicting DLLs. Is that right, or have a completely misunderstood?

Thanks again for all your help!

---

<div class="post-metadata">

**Author:** ![Palli](https://sea2.discourse-cdn.com/julialang/user_avatar/discourse.julialang.org/palli/32/3380_2.png) [@Palli](https://discourse.julialang.org/u/Palli)\
**Post date:** [May 15, 2024, 7:14pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/8 "2024-05-15T19:14:33Z")

</div>

Yes, it’s very strange you can’t precompile ANY packages, especially high-profile like Plots.jl. Are you sure you did noting like update or downgrade its version?

DLLs should be transparent, i.e. Plots.jl and other packages should download those needed (likely for its dependency GR.\_jll at least), and just work.

I’m not on Windows even, I just got curious, because of the large exit code, and went down a rabbit hole for you (I want to know how they work), can you at least run:

```julia
Err_6.4.5.exe C0000139

(@v1.10) pkg> st -m Plots
Status `~/.julia/environments/v1.10/Manifest.toml`
  [91a5bcdd] Plots v1.40.4

and confirm same version and if like me behind:

(@v1.10) pkg> st -m GR
Status `~/.julia/environments/v1.10/Manifest.toml`
⌃ [28b8d3ca] GR v0.72.8

update to latest:
(@v1.10) pkg> add GR@v73.5

```

---

<div class="post-metadata">

**Author:** ![Palli](https://sea2.discourse-cdn.com/julialang/user_avatar/discourse.julialang.org/palli/32/3380_2.png) [@Palli](https://discourse.julialang.org/u/Palli)\
**Post date:** [May 15, 2024, 7:30pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/9 "2024-05-15T19:30:09Z")

</div>

> [@gplayer](#):
>
> I’ve tried a completely fresh re-install of Julia. It’s worth noting this problem started spontaneously - my Julia install was working fine one day, the next day this error popped up

I think that’s your problem and what changed!

You likely had a 64-bit Julia install (as you “should” when possible).

It seems you installed a 32-bit one, i.e. “i686 (32-bit)” which (STILL) is a “Tier 1” platform, so you strictly didn’t do anything wrong.

I noticed in your error message i386pep that I didn’t recognize (and System32 and ldd.exe and was thinking why…)

[I’m on Linux and at one point I installed 32-bit Julia by accident, i.e. Ubuntu’s snap, I think it’s now 64-bit. It DID work, until it didn’t when using with Python (since it was 64-bit, and hard to mix such together at least on Linux), maybe even it was for/with plotting.]

While 32-bit should ideally just work, note it is no longer supported in Windows 11, and Windows 10 soon out of support, and almost all have 64-bit anyway. I think 32-bit is supported in Julia still to be helpful, so I like to know it it’s actually unhelpful… I know it’s hard to support (for libm), and I will be happy when it’s gone.

Julia can only do it’s part, and it can enable all _pure_ Julia packages, but many are not or have dependencies on DLLs, i.e. so called JLL packages that install them. It’s possible some such doesn’t work for you on 32-bit for some reason.

> <https://stackoverflow.com/questions/58791448/unrecognised-emulation-mode-i386pep-when-linking-x64-asm-on-windows-10>

Are you possibly using an ARM based Windows computer, that needs to emulate 32-bit/Intel? That would be very interesting info to know…

---

<div class="post-metadata">

**Author:** ![gplayer](https://avatars.discourse-cdn.com/v4/letter/g/a587f6/32.png) [@gplayer](https://discourse.julialang.org/u/gplayer)\
**Post date:** [May 15, 2024, 8:10pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/10 "2024-05-15T20:10:57Z")

</div>

I think I have the 64-bit version installed, the folder containing the binaries reads “julia-1.10.3+0.x64.w64.mingw32”, although I’m seeing that the mingw version is 32 bit somehow?

It’s probably worth noting I installed via the recommended “winget install julia -s msstore” methodology.

---

<div class="post-metadata">

**Author:** ![gplayer](https://avatars.discourse-cdn.com/v4/letter/g/a587f6/32.png) [@gplayer](https://discourse.julialang.org/u/gplayer)\
**Post date:** [May 15, 2024, 8:12pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/11 "2024-05-15T20:12:37Z")

</div>

I think I’m up to date on Plots and the GR backend.

![st_plots](https://global.discourse-cdn.com/julialang/original/3X/6/a/6ad79e75d0fb535afdf71300b902ef06021b0084.png)

---

<div class="post-metadata">

**Author:** ![Palli](https://sea2.discourse-cdn.com/julialang/user_avatar/discourse.julialang.org/palli/32/3380_2.png) [@Palli](https://discourse.julialang.org/u/Palli)\
**Post date:** [May 15, 2024, 8:45pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/12 "2024-05-15T20:45:03Z")

</div>

> [@gplayer](#):
>
> I think I have the 64-bit version installed, the folder containing the binaries reads “julia-1.10.3+0.x64.w64.mingw32”, although I’m seeing that the mingw version is 32 bit somehow?

I know what mingw is but unsure what mingw32 means in this context, so yes it may mean 32-bit, or some part of it is. Then why, or it it like that for all?

While you installed correctly, i.e. “juliaup” is now preferred the way you installed (did you not use originally?), can you try out the old type of download:  
[https://julialang-s3.julialang.org/bin/winnt/x64/1.10/julia-1.10.3-win64.exe](https://julialang-s3.julialang.org/bin/winnt/x64/1.10/julia-1.10.3-win64.exe)

---

<div class="post-metadata">

**Author:** ![giordano](https://sea2.discourse-cdn.com/julialang/user_avatar/discourse.julialang.org/giordano/32/2166_2.png) [@giordano](https://discourse.julialang.org/u/giordano)\
**Post date:** [May 15, 2024, 8:48pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/13 "2024-05-15T20:48:31Z")

</div>

> [@gplayer](#):
>
> I’m not allowed to embed two images

Note that it’s much easier for everybody involved if you copy-paste the text, rather than posting screenshots. The advantage, besides being actually readable, is that plain text is searchable, text inside pictures is not. But please quote the code

````julia
```
like this
```

````

---

<div class="post-metadata">

**Author:** ![gplayer](https://avatars.discourse-cdn.com/v4/letter/g/a587f6/32.png) [@gplayer](https://discourse.julialang.org/u/gplayer)\
**Post date:** [May 15, 2024, 8:51pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/14 "2024-05-15T20:51:44Z")

</div>

I re-installed from the download, same result unfortunately.

---

<div class="post-metadata">

**Author:** ![Palli](https://sea2.discourse-cdn.com/julialang/user_avatar/discourse.julialang.org/palli/32/3380_2.png) [@Palli](https://discourse.julialang.org/u/Palli)\
**Post date:** [May 16, 2024, 5:07pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/15 "2024-05-16T17:07:18Z")

</div>

I’m kind of giving up, what does this show:

```julia
(@v1.10) pkg> st -m

and:

C:\> Err_6.4.5.exe C0000139

```

It’s ldd.exe failing for some reason but I no longer think because of 1386pep, i.e. I no longer think it or -mingw32 implies 32-bit, since seeing this:

> Mingw-w64 can generate 32 bit and 64-bit executables for x86 under the target names i686-w64-mingw32 and x86\_64-w64-mingw32.

> <https://stackoverflow.com/questions/55825807/using-llvm-linker-lld-with-mingw>

---

<div class="post-metadata">

**Author:** ![mkitti](https://sea2.discourse-cdn.com/julialang/user_avatar/discourse.julialang.org/mkitti/32/12459_2.png) [@mkitti](https://discourse.julialang.org/u/mkitti)\
**Post date:** [May 16, 2024, 5:24pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/16 "2024-05-16T17:24:19Z")

</div>

Open cmd.exe and try to run lld.exe directly by providing the full path indicated in the error. If you can figure out what is preventing that from running, your issues will be partly solved.

---

<div class="post-metadata">

**Author:** ![gplayer](https://avatars.discourse-cdn.com/v4/letter/g/a587f6/32.png) [@gplayer](https://discourse.julialang.org/u/gplayer)\
**Post date:** [May 16, 2024, 6:52pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/17 "2024-05-16T18:52:13Z")

</div>

Thanks again for all the help! There does appear to be some issue with lld.exe when I attempt to run it independently.

Output from the error checker is below.

```julia
PS C:\Users\gplayer\Downloads> .\Err_6.4.5.exe C0000139
# for hex 0xc0000139 / decimal -1073741511
  STATUS_ENTRYPOINT_NOT_FOUND ntstatus.h
# {Entry Point Not Found}
# The procedure entry point %hs could not be located in the
# dynamic link library %hs.
# as an HRESULT: Severity: FAILURE (1), FACILITY_NULL (0x0), Code 0x139
# for hex 0x139 / decimal 313
  ERROR_NOT_ALLOWED_ON_SYSTEM_FILE winerror.h
# Operation is not allowed on a file system internal file.
# 2 matches found for "C0000139"

```

And from Pkg (I only have CSV downloaded for testing):

```julia
(@v1.10) pkg> st -m
Status `C:\Users\gplayer\.julia\environments\v1.10\Manifest.toml`
  [34da2185] Compat v4.15.0
  [864edb3b] DataStructures v0.18.20
  [bac558e1] OrderedCollections v1.6.3
  [1fd47b50] QuadGK v2.9.4
  [56f22d72] Artifacts
  [2a0f44e3] Base64
  [ade2ca70] Dates
  [b77e0a4c] InteractiveUtils
  [8f399da3] Libdl
  [37e2e46d] LinearAlgebra
  [d6f4376e] Markdown
  [de0858da] Printf
  [9a3f8284] Random
  [ea8e919c] SHA v0.7.0
  [fa267f1f] TOML v1.0.3
  [cf7118a7] UUIDs
  [4ec0a83e] Unicode
  [e66e0078] CompilerSupportLibraries_jll v1.1.1+0
  [4536629a] OpenBLAS_jll v0.3.23+4
  [8e850b90] libblastrampoline_jll v5.8.0+1

```

---

<div class="post-metadata">

**Author:** ![gplayer](https://avatars.discourse-cdn.com/v4/letter/g/a587f6/32.png) [@gplayer](https://discourse.julialang.org/u/gplayer)\
**Post date:** [May 16, 2024, 6:58pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/18 "2024-05-16T18:58:08Z")

</div>

So I ran lld.exe - I received the following errors:

The procedure entry point \_ZSt14\_\_once\_functor could not be located in the dynamic link library C:\Users\gplayer.julia\juliaup\julia-1.10.3+0.x64.w64.mingw32\libexec\julia\lld.exe

The procedure entry point \_ZSt14\_\_once\_functor could not be located in the dynamic link library C:\Users\gplayer.julia\juliaup\julia-1.10.3+0.x64.w64.mingw32\bin\libLLVM-15jl.dll

I’m not sure what to make of this, honestly. Am I trapped in DLL hell?

---

<div class="post-metadata">

**Author:** ![Palli](https://sea2.discourse-cdn.com/julialang/user_avatar/discourse.julialang.org/palli/32/3380_2.png) [@Palli](https://discourse.julialang.org/u/Palli)\
**Post date:** [May 16, 2024, 7:52pm UTC](https://discourse.julialang.org/t/unable-to-precompile-any-packages/114311/19 "2024-05-16T19:52:53Z")

</div>

I had no idea about \_ZSt14\_\_once\_functor, only libLLVM-15jl.dll and looking it up it seems to be a known problem (and solution):

> [@C/C++ embedding on Windows](https://discourse.julialang.org/t/c-c-embedding-on-windows/17828/2):
>
> Problem is solved… I had C:\Program Files\LLVM\bin\ in my PATH which somehow seemed to conflict with Julia’s LLVM files.

What exactly you did, to cause this, I would like to know. And since it’s a known problem, maybe Julia could do something to mitigate it, more than just explaining the error code or showing it just in hex, rather point to the fix.